General Setup

Before installing MicroMD PM, verify that the following items have been accomplished:

All computers must meet the MicroMD minimum hardware requirements. (See the “Hardware and Software Requirements” documents. You can access these documents via the MicroMD Lounge. Third-party hardware vendors can contact their support representative.)
The following network components must be installed and properly configured on all computers that will connect to a network:
- Client for Microsoft® Networks (used to validate network log-ons)
- TCP/IP network protocol (used for network connectivity)
- File and Print Sharing for Microsoft® Networks (allows sharing of files and printers on the network)
All computers must be assigned an IP address (static IP preferred).
Operating systems on all computers must be updated to the required Service Pack. The most current service pack is always recommended. Please refer to the “Hardware and Software Requirements” specification documents for detailed requirement information.
All relevant Windows security and other patches installed from the Microsoft® web site.
Monitor color depth should be set to 16-bit or higher for all computers. 1024 x 768 resolution is recommended.
Access to the internet is required.

Server Setup

Server must meet all hardware and software requirements outlined in the “Hardware and Software Requirements” documents.

You may have to continue running custom updates until there are no more left.

You must create user accounts on the server for each workstation.
You must set up a Windows computer account for administrative and support purposes.
Ensure that the Database Server has the necessary privileges to send mail using SMTP.
You must create user accounts on the server for each workstation.
You must install and configure a backup unit.

All workstations must be physically or wirelessly connected to the server via a switch, hub, network cable, access point, or WAN.
All workstations must be able to access the server via the network.
Verify that .NET Framework 4.0 and any recent updates are installed (choose Custom when running Microsoft updates).

You may have to continue running custom updates until there are no more left.

The default printer(s) should be installed and tested on all workstations. Users should have permission to manage print jobs.
A modem must be installed and configured on the workstation that will be used to send electronic claims.